Custom entrance, gate, and column install — S&S Fencing project 1

    Driveway, Sliding & Automatic Gates KY

    Gates — From Walk Gates to 35-Foot Automatic Entrances

    Driveway, sliding, swing, and automatic gates built and installed across Kentuckiana — custom farm-name and commercial slide gates.

    • Family-owned since 2015
    • Fully Insured
    • BBB Accredited
    • Blue Book ProView
    • New Installs & Full Replacements
    • Free On-Site Walk
    • No Subcontractors

    Gate Types We Build & Install

    Driveway gates — residential and farm driveway gates in pipe, board, aluminum, or custom-welded steel. Single-swing, double-swing, or slide configurations.

    Pedestrian / walk gates — matching walk gates for board fence, ornamental aluminum, chain-link, and vinyl fence lines.

    Sliding (slide) gates — space-efficient, motor-operable cantilever or V-track gates for commercial yards and tight residential driveways.

    Swing gates — single and double-swing in any material, with manual hardware or powered operators.

    Automatic / motorized gates — gate operators, keypads, intercoms, loop detectors, and access control. Coordinated with your electrical and low-voltage scope.

    Custom welded gates — farm names, ranch brands, logos, horse silhouettes, and any design you can sketch — welded into steel and built to outlast generations.

    Swing vs. Slide vs. Cantilever — How to Choose

    The right gate starts with the opening and the ground around it. Swing gates are the simplest and most economical, but they need clear space to arc into — a single swing needs its full width of clearance, and a double swing splits that in half. They also need reasonably level ground across the swing path. Slide gates travel along the fence line instead, so they work where there's no room to swing — but they need clear fence line equal to the opening for the gate to retract into. Cantilever gates are slide gates that float above the ground on rollers, so gravel, mud, snow, and uneven pavement never jam a track. For commercial yards and Kentucky weather, cantilever is usually the honest recommendation.

    Sizing a Gate for Your Equipment

    Measure the widest thing that will ever go through the opening — then think about what's coming next. A gate that fits today's pickup should also fit the delivery truck, the trailer, the tractor with the mower deck, or the emergency vehicle that needs in at the worst moment. On farms, think about hay equipment and stock trailers. On commercial sites, think about box trucks and fire apparatus access. We measure openings on the site walk and will tell you straight if the width you're picturing will cost you later.

    Commercial & Industrial Gates

    For warehouses, manufacturing facilities, distribution yards, and secure perimeters, we install commercial slide gates with safety edges, photo-eyes, and loop detectors meeting UL 325. Heavy-gauge steel frames, anti-climb topping, and operator pairings we trust on hard-cycle commercial duty.

    Featured Project — 35-Foot Commercial Entrance, Four Roses Distillery in Cox's Creek, Kentucky

    Our most recognized gate: a 35 ft commercial chain link cantilever entrance gate on LiftMaster operators at Four Roses Distillery in Cox's Creek, Kentucky, alongside a 28 ft custom fabricated metal cantilever security gate on the same campus. See the Four Roses case study.

    Gate Hardware and Your Warranty

    Gate hardware is the part of a fence that works hardest — hinges, latches, and drop-rods cycle every day. That's why our 1-year workmanship warranty specifically covers gate hinges, latches, drop-rods, and gate-frame welds, along with the workmanship on operator installs. Operator hardware itself carries the manufacturer's coverage. If a gate we hung sags or a latch fails within the first year, we come back and make it right at no charge.

    Thinking About Automation?

    Any gate conversation should include the automation question, even if the answer is "not yet." A gate built for a future operator gets the right posts, frame, and conduit path from day one; retrofitting later means working around decisions that were already poured in concrete. We install slide-gate and swing-gate operators, keypads, intercoms, and loop detectors, and we coordinate trenching and conduit with your electrical trades. See the details on our gate operators and access control page, or browse custom entrances for what's possible.

    Request a Gate Quote

    Call 502-468-1209 or request a free estimate. We'll walk the site, take measurements, and quote your gate honestly.

    Common Questions

    Frequently Asked Questions

    Driveway gates, pedestrian / walk gates, sliding (slide) gates, swing gates (single and double), and automatic / motorized gates. From small 3-foot walk gates up to 35-foot commercial entrance systems.
    Yes. We install slide-gate and swing-gate operators (LiftMaster, FAAC, and similar), keypads, intercom, and loop detectors. We coordinate trenching and conduit with low-voltage and electrical trades.
    Yes. Custom-cut lettering, logos, brands, and silhouettes welded into steel — one of our most-requested gate services. Typical lead time 2–4 weeks for custom fabrication.
    Farm pipe gates start around $500–$1,500 installed. Custom welded name gates run $1,500–$5,000+. Commercial entrance systems with operators are bid project-by-project. Call 502-468-1209 for a free quote.
    Often, yes — if the gate frame and posts were built to handle it. The cheapest time to plan for automation is before the gate goes in, so mention it even if you're not ready to buy the operator yet.
    Hinges, latches, drop-rods, and gate-frame welds are covered under our 1-year workmanship warranty, along with the workmanship on operator installs. The operator hardware itself carries the manufacturer's warranty.
    Wide enough for the largest vehicle or piece of equipment that will ever use it — including delivery trucks and emergency vehicles. We measure openings on the free site walk and recommend a width based on what you actually need to get through.

    Ready to get started?

    Free on-site walk. One-business-day callback. Or dial Shawn directly.

    Family-Owned · Woman-OwnedFully Insured · COIs on Request1-Year Workmanship WarrantyNew Installs & Full ReplacementsFree On-Site Estimates
    BBB Accredited BusinessBlue Book ProView Verified

    Ready for your free fence estimate? Call Shawn & Shelby anytime.